Product details
|
Size |
Approximately 6.5" (16.5 cm) diagonal viewing area |
|
Resolution |
640 x 480 pixels (VGA) with 32 brightness levels per color |
|
Type |
Approximately 6.5" (16.5 cm) diagonal viewing area |
|
Sweep speed |
20 mm/s nominal (stationary trace; sweeping erase bar) for ECG and SpO2 ml/s |
|
Wave viewing time |
5.2 sec |
|
Environmental |
 |
|
Operating temperature |
0°C to 45°C (32°F to 113°F) |
|
Storge temperature |
20°C to 70°C (-4°F to 158°F) |
|
Defibrillator |
 |
|
Waveform |
Biphasic Truncated Exponential. Waveform parameters adjusted as a function of patient impedance |
|
Shock delivery |
Via multifunction electrode pads or paddles |
|
Shock series |
Configurable energy escalation in a series |
|
Charge time |
3 seconds to the recommended adult energy level (150 Joules) with a new fully-charged battery installed |
|
Less than 5 seconds to the selected energy level (up to 200 Joules) with a new fully charged battery installed |
|
|
The device powers on in manual defibrillation mode ready to deliver shock in less than 8 seconds plus applicable charge time assuming an immediate selection of an energy and initiation of a charge even at 90V AC and after 15 maximum energy discharges |
|
|
The device powers on in AED mode ready to deliver shock in less than 17 seconds plus applicable charge time |
|
|
Leads sensing |
Leads off sensing and PCI sensing for pads/paddles. Apply 500nA rms (571Hz); 200uA rms (32KHz) |
|
Minimum patient impedance range |
25 ohm (external defibrillation);15 ohm (internal defibrillation) ohm |
|
Maximum patient impedance range |
250 ohm. Actual functional range may exceed these values ohm |
Similar products
